|
The EWS 05-50 will strip many Film Insulation including Enamel, Varnish etc., fora range of wire sizes between 0.5 to 5.0 mm. Using a high speed rotary stripping insert, which is precisely adjustable to match the diameter of the bare conductor, surface insulation is easily removed. The insert is held in a special adjustable chuck assembly which, when locked in position, allows precise repetitive stripping without risk of damage to the conductor.
4 Conical Stripping Insert provided along with the Stripper suitable for different wire sizes. Insert No.1 = 0.5 -0.8 mm; Insert No.2 = 0.8 to 1.5 mm; And Optional ( Insert No. 3 = 2 mm; Insert No.4 = 1.5 to 3.0 mm; Insert No.5=3 mm to 5 mm
SIMPLE SET UPS AND STRIPPING OPERATION :
1. Insert the wire stopper to collate and adjust the stopper according to your application for unique length of wire stripping
2. Loosen the Chuck Assembly with the two wrenches provided.
3. Place Stripping Insert into the chuck and hand tighten.
4. Place the work piece into the insert and tighten the Chuck Assembly with the wrenches provided so that the insert closes but the work piece can still be removed.
5. Remove the work piece and start the EWS 05-50.
6. Strip the wire by pushing into the Stripping Insert and remove to examine.
7. If insulation is not completely removed switch off EWS 05-50, tighten Chuck Assembly and repeat stripping operation.
|
