Karnataka ads Karnataka, All categories classifieds Karnataka, All categories free ads Karnataka, ads for sale Karnataka, ads to buy Karnataka, FREEADS in India Karnataka Page number 17-2

SPD-V010 Handheld Roll Gap Checker Overview The handheld roll gap checker is specially used to measure the length between spherical surface, arc surface and plane (or spherical surface). It is specially suitable for the opening adjustment of the roll gap of the metallurgical continuous casters in various specifications, because the roll gap checker has the advantages of high resolution, accurate measurement, stable data and easy to use.

MDC-K120 Slab Mold Taper Measuring Instrument Overview The taper of the narrow face of the mold has an important influence on the quality of the casting billet. Excessive taper will cause the mold to squeeze the billet shell, and a small taper will increase the air gap. With the continuous increase of the requirements of the casting billets’ quality and the continuous introduction of high-precision molds, the current taper measuring instrument in the domestic market generally have low measurement accuracy and complex measurement methods, which restrict the development of production.

MDC-K400 Square and Round Billet Taper Measuring Instrument The product description The square, rectangular and round billet taper measuring instrument adopts high-precision displacement sensor as the measuring element, which has high precision and good repeatability. The measuring trolley ensures that the measuring sensor is in the correct position.

SPD-V020 Multifunctional Strand Condition Monitor Overview In the production process of the multifunctional strand condition monitor, in order to ensure the quality of the slab, it is necessary to strictly control the performance and various parameters of the CCM’s guide roll within a certain error range.

LAG-S200 Ladle Slag Detection System (Vibration Type) Overview The continuous casting vibration type ladle slag detection device is used to detect the slag content of the ladle nozzle in the steelmaking continuous casting process, so as to improve the cleanliness of the tundish molten steel and obtain the best yield of the ladle molten steel.

BPS-K600 Mould Breakout Prediction System Overview: The BPS-K600 continuous casting mould breakout prediction system is developed by Wuhan CenterRise M&C Measuring Co., Ltd. It adopts artificial neural network and combines with traditional artificial intelligence and information processing technology to overcome the defects of traditional logic-based prediction models.

Handheld Thermocouple Calibrator Model: LGK-JS02-064 Overview LGK-JS02-064 handheld thermocouple calibrator is a product independently developed and designed by Wuhan CenterRise M&C Engineering Co., Ltd. The calibrator can measure the temperature detected by two thermocouples. We fully consider the customer's needs.

LGK-JS03 Mould Breakout Prediction System Thermocouple Calibrator Overview LGK-JS03 Mould Breakout Prediction System Thermocouple Calibrator is a patented product of Wuhan CenterRise M&C Engineering Co., Ltd. It is a special equipment specially developed for off-line detection of mold breakout prediction thermocouples.

Infrared/Laser Cut-to-Length Cutting System Overview The all-digital non-contact infrared automatic cut-to-length cutting system developed by Wuhan CenterRise M&C Engineering Co., Ltd. is the first digital measurement, digital transmission, digital positioning and digital control technology in China.

ZSQ-T100 Online Surface Quality Inspection System for Casting Billet (Eddy Current) The principle of the system The ZSQ-T100 online surface quality inspection system for casting billet adopts the principle of eddy current non-destructive testing. According to the section of the continuous casting machine and the shape of the casting billet, the eddy current sensors of different structures can be used to realize the non-contact surface defect detection on the surface of the billet, and draws the surface defect graph of the billet in real time according to the detection results.

MOC-K100 Mould Online Oscillation Monitoring System Overview Mold is the casting billet forming equipment in continuous steel casting, and it is also the core equipment and key technology of continuous casting machine. Its function is to forcibly cool the high-temperature molten steel continuously injected into its inner cavity through the water-cooled copper plate to export its heat and to gradually solidify it into a casting billet with the required cross-sectional shape and billet shell thickness.

MAC-G350 Automatic Mold Flux Feeding Machine Overview The MAC-G350 automatic mold flux feeding system is a mold flux feeding equipment that adopts the method of pneumatic transmission flux feeding. This method can place the charging bin in a centralized manner and can carry out charging operation simultaneously for one machine and many continuously cast products.

CPC-D100 CPC Photoelectric Strip Automatic Center Position Control System The composition of the system The photoelectric strip automatic center position control system is mainly composed of sensors, amplifiers, PLC controllers, hydraulic control and other parts. System composition block diagram The main technical parameters 1.

MLC-V235 Continuous Casting Mold Level Automatic Measurement System Overview The automatic control for the molten steel level of the mold is one of the key technologies of continuous casting production. It is very important to reduce the labor intensity of workers, improve production efficiency, improve the quality and output of casting billet, reduce overflow and breakout of steel and improve the management level of steelmaking and continuous casting.

LDC-X200 Laser Diameter Measurement System Overview The non-contact diameter measuring system, is mainly used in the measurement of the outer diameter of various wire rods, bars, wires and pipes. The system can detect the change of the diameter (outer diameter) of the measured object in real time under the high temperature state.

WGS-L020 Flat Steel/Ribbon Iron Width Measuring System Overview Whether the width and thickness of the flat steel/ribbon iron width measurement device can meet the standard in the production process directly determines the quality of the flat steel/ribbon iron. How to carry out high-precision measurement of flat steel produced at high speed is the key technology to improve the production efficiency and quality of flat steel.

Overview: In the steelmaking production process, the ladle is the key equipment for holding molten steel, secondary refining, and continuous pouring. In a modern steelmaking plant, refractory materials are required for converters, refining, and ladles. In the steelmaking process, ladle is the most important part in the use and consumption of refractory materials.

Overview： This product is a new type of mold copper plate surface cladding detection equipment. The equipment adopts a high-precision and high-sensitivity laser ranging sensor, which scans the copper plate of the mould by scanning a laser line with a fixed width, and returns the measurement data in real time.

Overview The system aims at the continuous temperature detection of the product obtained from the continuous casting machine. The billets and their surrounding environmental factors such as scale, steam, shielding and other factors, are considered in the scheme design and equipment selection. The accurate detection and real-time transmission of temperature during the billets movement are also considered.

Overview: Laser taper measuring instrument (multi-dimensional detection) is a new type of mold multi-taper measuring instrument developed by our company. The instrument adopts a high-precision, high-sensitivity laser measurement and positioning sensor, which scans the copper plate of the mold by a fixed-width laser line, and returns the measurement data in real time.

LAG-S400 Infrared Converter Slag Detection System Overview The infrared converter slag detection system uses a far-infrared thermal imager to monitor the situation of converter tapping in real time, and is connected to the main control computer in the electrical room through the conversion and transmission of video signals.

Overview: LGK-S107 analog heat source instrument (heating tool) is independently developed and designed by Wuhan CenterRise M&C CO., . This instrument is a heating and testing equipment used to test the performance of the couple installed in the mold in continuous casting machine. After the installation of the mold breakout forecast couple is completed, the analog heat source instrument is used to test these couples before they go online.

Discover accurate temperature readings with the KT 300 thermometer in Bangalore. This state-of-the-art device ensures precise measurements and reliable performance for various applications. KT 300 thermometer services at best price : Call :- +91-8026749750/ +91-7353753764 Email:-sales@htaipl.com Link :- https://htaipl.

Looking for reliable clamp meters in Bangalore? Discover top-quality clamp meters designed to accurately measure electrical current without interrupting circuits. Find the perfect tool for your electrical testing needs in Bangalore with a wide selection of clamp meters from trusted brands. Clamp Meter Services at best price : Call :- +91-8026749750/ +91-7353753764 Email:-sales@htaipl.

We are one of the leading companies offering SAT and TUS testing services at competitive rates. All of our prior clients have been satisfied with our services, and our professionals have a wealth of expertise and experience in this area. SAT and TUS Testing Service at best price: Call :- +91-8026749750/ +91-7353753764 Email:-sales@htaipl.

Are you trying to find a mapping service in Bangalore?? One of Bangalore's top companies that offers mapping services is us. Whenever you need a mapping service, contact us. Mapping Service at best price: Call :-+91-8026749750/ +91-7353753764 Email :-sales@htaipl.com Link :-https://htaipl.com/mapping/.

We offer ISO 17025 calibration laboratory services in Bangalore. All our customers are happy and satisfied with our service. NABL ISO 17025 Calibration Laboratory Service at best price: Call :-+91-8026749750/ +91-7353753764 Email :-sales@htaipl.com Link :-https://htaipl.com/certificate/.

The best flow metre calibration services in Bangalore are offered by HTAIPL at competitive rates. All of our prior clients were pleased with our services, and our professionals have a lot of expertise and experience in this area. Flow Meter Calibration Service at best price: Call :-+91-8026749750/ +91-7353753764 Email :-sales@htaipl.

As one of the finest water test kit manufacturers in Bengaluru, we provide a wide variety of water testing goods at reasonable prices. Get Water Test kit at Best Price : Call :-+91-8026749750/ +91-7353753764 Email :-sales@htaipl.com Link :-https://htaipl.com/shop/water-quality-measuring-instruments/refractormeter/water-test-kits/.

HTAIPL is a Bangalore based company , we manufactures and Supply high quality temperature controllers at an affordable price . Buy temperature controller at best price: Call :-+91-8026749750/ +91-7353753764 Email :-sales@htaipl.com Link :- https://htaipl.com/temperature-controller-manufacturers-in-bangalore/.